Now there is a few ways you can transfer the image on the case. I traced (with pencil) around all the edges of the image. Then I flipped the image over and rubbed on the back to transfer the pencil marks. If you are not too artistic I do not suggest doing it this way. The pencil marks are very light and you have to mostly redraw it with a sharpie. For the drawing impaired, another way is to cut the image out with scissors and stick it to the side panel. Then trace around it. If you are the extreme artist, you might just draw it on the side panel freehand. It is important to get all the edges strait with a ruler, straightedge, or other semi-strait object (I used a thick magazine). Depending on your image, your final product should look something like below.